View TL-PA2030_7730711.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TL-PA2030 av200 3-port mini powerline adapter rev1.0.0 1910010848
i copyright & trademarks specifications ar e subject to change without notice. is a registered trademark of tp-link technologies co., ltd. other brands and product names are trademarks or registered trademarks of their respective holders. no part of the specificat ions may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from tp-link technologies co., ltd. copyright ? 2013 tp -link technologies co., ltd. all rights reserved. http://www.tp-link.com
ii fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installa tion. this equipment genera tes, uses and can radiate radio frequency energy and, if not installed and used in accordance wi th the instructions, may cause harmful interference to radio communications. howeve r, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be det ermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ? reorient or relocate the receiving antenna. ? increase the separation between the equipment and receiver. ? connect the equipment into an outle t on a circuit different from t hat to which the receiver is connected. ? consult the dealer or an experienc ed radio/ tv technician for help. this device complies with part 15 of the fcc rules. o peration is subject to t he following two conditions: 1) this device may not cause harmful interference. 2) this device must accept any interference received, including interference that may cause undesired operation. any changes or modifications not expressly approve d by the party responsible for compliance could void the user?s authorit y to operate the equipment. ce mark warning this is a class b product. in a domestic environment, th is product may cause radio interference, in which case the user may be required to take adequate measures. ?? ??????? ???? ?????? ??? ?? ? ????? ????? ??????? ?????? ????? , ??????? ????? ????????? ???? ??? . safety information ? when product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. ? don?t disassemble the product, or make repairs yourself. you run the risk of electric shock and voiding the limited warranty. if y ou need service, pl ease contact us. ? avoid water and wet locations.
iii this product can be used in the following countries: at bg by ca cz de dk ee es fi fr gb gr hu ie it lt lv mt nl no pl pt ro ru se sk tr ua
tp-link technologies co., ltd tp-link technologies co., ltd. building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) central science and technology park, shennan rd, nanshan, shenzhen, china declaration of conformity for the following equipment: product description: av200 3-port mini powerline adapter model no.: TL-PA2030 trademark: tp-link we declare under our own responsibilit y that the above pro ducts satisfy all the technical regulations applicable to the product within t he scope of council directives: directives 2004 / 108 / ec, directives 2006 / 95 / ec, directives 2011/65/eu the above product is in conformity with the following standards or other normative documents en 55022:2010 en 55024:2010 en 61000-3-2:2006+a1:2009+a2:2009 en 61000-3-3:2008 en 50412-2-1:2005 en60950-1:2006+a11:2009+a1:2010+a12:2011 the product carries the ce mark person responsible for mark ing this declaration: yang hongliang product manager of international business date of issue: 2013
v contents package c ontents ............................................................................................................ 1 chapter 1 in troducti on ..................................................................................................... 2 1.1 conventions ............................................................................................................................ 2 1.2 system requirement......................................................................................................... ...... 2 1.3 important safety instructions................................................................................................... 2 chapter 2 connect ing mech anism.................................................................................. 4 2.1 introduction ............................................................................................................................. 4 2.2 led indicator .......................................................................................................................... 4 2.3 physical interface .................................................................................................................... 5 2.4 connection instruction............................................................................................................. 6 2.5 hardware connection ? computer.......................................................................................... 6 2.6 hardware connection ? internet ............................................................................................. 7 chapter 3 installing ma nagement utility......................................................................... 8 chapter 4 using the ma nagement utility ...................................................................... 12 4.1 status .................................................................................................................................... 12 4.1.1 set local device?s network name.................................................................................. 13 4.2 network ................................................................................................................................. 14 4.2.1 rename the remote device/enter password ................................................................ 15 4.2.2 add device............................................................................................................... ....... 15 4.3 system .................................................................................................................................. 16 4.3.1 upgrade firmware ......................................................................................................... . 16 4.3.2 reset device .................................................................................................................. 17 4.3.3 set all devices? network name ...................................................................................... 18 chapter 5 advanced feature: ho w to use the pair button......................................... 19 5.1 pair (secure with 128 bits-aes)............................................................................................ 19 5.2 set up a powerline av network with the pair button............................................................ 19 appendix a: tr oubleshoot ing........................................................................................ 21
TL-PA2030 av200 3-port mini powerline adapter 1 package contents the av200 3-port mini powerline adapter package contains the following items: ? one av200 3-port mini powerline adapter (there are two av200 3-port mini powerline adapters in starter kit) ? one rj45 ethernet cable (there are two rj45 ethernet cables in starter kit) ? one resource cd z this guide z management utility ) note: make sure that the package contains the above items. if any of t he above items are damaged or missing, please contact your dealer immediately.
TL-PA2030 av200 3-port mini powerline adapter 2 chapter 1 introduction congratulations on your purchase of this outstandi ng powerline adapter. this device is an av200 3-port mini powerline adapter which transforms your hous e?s existing electrical wiring into a ubiquitous networking infrastructure. simply plug this av200 3- port mini powerline adapter into an ordinary ac power outlet which will easily ext end your cable/xdsl broadband connec tion or existing ethernet (lan) network to any other electrical outlet in any room of a house without the nee d of any new cabling. this powerline adapter supports up to 200mbps data rate over the existing household power circuit. with data rates of 200mbps, full multimedia applicat ion can easily be supported throughout the whole house in addition to internet access. this powerline adapter uses the existing power lines installed in a home as a path to transmit digital data, voice, audio and vid eo between devices. to ensure data communication?s security and multimedia applications, this powerline adapter supports built-in 128-bit aes encryption. with minimum setup, you can install and use this powerline adapter within minutes. the adapter adds two useful functions. 1 existing connection with a new unassociated device added via the pair button. 2 reset to default setting via the management utility . 1.1 conventions the powerline adapter or av200 3-port mini powerline adapter mentioned in this guide stands for TL-PA2030 av200 3-port mini powerline adapter wit hout any explanation. 1.2 system requirement a) at least two power outlets (100?240v~) with standard home power wiring b) a computer with the following: ? operating system with tcp/ip installed ? pentium iii compatible processor and above ? ethernet lan card installed with tcp/ip protocol ? 64 mb ram or more ? 50 mb of free disk space (minimum) ? cd-rom drive 1.3 important safety instructions 1. do not open this product or attempt to servic e it; it may expose you to dangerous high voltage or other risks. 2. do not operate this product near water. 3. do not place or operate this produc t near a radiator or a heat register. 4. do not expose this product to dampness, dust or corrosive liquids. 5. do not connect this product or disconnect it from a wall socket during a lightning or a thunderstorm 6. do not block the ventilation slots of this product, for insufficient airflow may harm it. 7. do not put anything on this product.
TL-PA2030 av200 3-port mini powerline adapter 3 8. plug this product directly into a wall socket ( 100?240v~). do not use an exte nsion cord between this product and the ac power source. 9. when plugging this product into a wall socket, make sure that the electric al socket is not damaged, and that there is no gas leakage. 10. place the connecting cables properly so that people won?t stumble or walk on it. 11. this product should be operated fr om the type of power indicated on the marking label. if you are not sure of the type of power availabl e, consult the qua lified technician. 12. unplug this product from the mains and refer the product to qualified service personnel for the following conditions: ? if liquid has been spilled on the product ? if the product has been exposed to rain or water 13. unplug this product from the wall socket befor e cleaning. use a damp cloth for cleaning. do not use liquid cleaners or aerosol cleaners. 14. the specificati on of the fuse is t2.5al250v . to avoid damage, please do not change the fuse. 15. the operating temperature is 0 ~4 0 (32~10 H 4) H . 16. the storage temperature is -40 ~70 (-40 ~158 ) HH .
TL-PA2030 av200 3-port mini powerline adapter 4 chapter 2 connecting mechanism 2.1 introduction the powerline adapter supports up to 200mbps data ra te. with this high speed connection rate, this powerline adapter allows you to setup a high speed home network by usi ng your home existing electrical wiring. simply plug this powerline adapte r into an ordinary power outlet to extend your cable/xdsl broadband connection or ex isting lan network to any other electrical outlet in any rooms of your house. note that this powerline adapter works in pairs. you need to plug one powerline adapter into a power outlet for each computer (connect to the computer lan card) you want to c onnect (network access); you will also need another powerli ne adapter connected to your cabl e/xdsl broadband (ethernet port) in order to extend your broadband connection or inte rnet surfing. with clean powerline, the distance between two powerline adapters can reach 300 meters at lease, but the actual distance may vary due to the environment. section below describes the powerline adapter?s led indicators, physical interface and hardware connection mechanism. 2.2 led indicator the led indicator displays inform ation about the de vice?s status. item status indication on the adapter is on. blinking the adapter is in pairing procedure. power led off the adapter is off. on the adapter is connecte d to a powerline network. blinking the adapter is transferring data. powerline led off the adapter isn?t connected to any powerline network.
TL-PA2030 av200 3-port mini powerline adapter 5 on at least one ethernet port is connected, but there is no data being transferred. blinking at least one ethernet port is transferring data. ethernet led off no ethernet port is connected. 2.3 physical interface there are three physical interfac es on this powerline adapter. interface description ethernet port three 10/100mbps ethernet ports for connecting the adapter to the pc or the broadband device with a network cable. power plug* a power plug for connecting t he adapter to a power socket (100?240v~). pair button pair button is used to secure a power line network. to secure your network, please follow the steps below. firstly, plug in a new adapter, and press its pair button for 1 second; then plug in another adapter and press its pair button for 1 second as well. the two buttons should be pressed within 2 minutes of each other. after that, wa it about 60 seconds so that the two adapters can finish connecting. * the provided power plug may differ from the pict ure due to different regional power specifications. here we take the eu version of this product as an example. ) note: 1. if the pair button is pressed till all the leds turn off (about 10 se conds), the powerline adapter will leave the network which it is associated with and its network name assumes a random value. the power led turns off when it disconnects from the powerline network. 2. for detailed information about the pair button, please refer to chapter 5 advanced feature: how to use the pair button . ethernet port power plug pair button
TL-PA2030 av200 3-port mini powerline adapter 6 2.4 connection instruction to ensure the optimum perf ormance of the powerline adapter and si gnificantly improve the transmission capacity of the network, we recommend that y ou comply with the following connection rule: y plug the powerline adapter directly into a wall socket but not the multiple sockets. 2.5 hardware connection ? computer for those computers you wish to be networked by powerline adapter, each of the computers must be properly connected with a powerline a dapter through an ethernet (rj45) cable. following are the steps to properly connect the powerline adapter to your computer: 1 connect one end of the provided ethernet (rj45) c able to an ethernet port of the powerline adapter. 2 connect the other end of t he ethernet (rj45) cable to you computer?s lan port. 3 plug the powerline adapter into a wall socket next to the computer. 4 turn on your computer. 5 check and confirm that the power led and ethernet led on the powerline adapter are on . the hardware connection mec hanism is shown below:
TL-PA2030 av200 3-port mini powerline adapter 7 2.6 hardware connection ? internet this section describes how to connect the powe rline adapter into your existing adsl broadband connection via adsl ethernet port. follow the proc edures described below to connect the powerline adapter to your adsl broadband connection: 1 connect one end of the provided ethernet (rj45) c able to an ethernet port of the powerline adapter. 2 connect the other end of the et hernet (rj45) cable to an avail able ethernet port of your adsl broadband router. 3 plug the powerline adapter into a wall socket next to the computer. 4 turn on your computer. 5 check and confirm that the power led , ethernet led , and powerline led on the powerline adapter are on . the hardware connection mec hanism is shown below: ) note: do not connect the powerline adapter to an extens ion lead, power strip, extension cord, or surge protector as these may degr ade the network performance.
TL-PA2030 av200 3-port mini powerline adapter 8 chapter 3 installing management utility please verify that no other powe rline adapter or any encryption management utilities are installed before installing the provided software. if other po werline utilities are installed, uninstall them and restart your personal computer before installing this provided software. ) note: to install powerline utility, please make sure that winpcap (version 4.1.2 or higher) has been installed in your computer. otherwise, a window will pop up for you to install winpcap 4.1.3. take the following procedur es to properly install t he provided management utility: step 1: insert the resource cd into your cd-r om drive, and then the following setup wizard will automatically pop up on y our computer?s screen. step 2: select 200mbps powerline and click management utility , and then the program installation process will carry out and copy all t he necessary files to your system.
TL-PA2030 av200 3-port mini powerline adapter 9
TL-PA2030 av200 3-port mini powerline adapter 10
TL-PA2030 av200 3-port mini powerline adapter 11 step 3: after the installation, a shortcut to the ?powerline utility? application icon is provided on the windows desktop.
TL-PA2030 av200 3-port mini powerline adapter 12 chapter 4 using the management utility after you?d successfully installed the powerline adapter hardware and managem ent utility software, you can set up or configure the devic es according to your need. this powerline utility enables t he users to identify powerline de vices on the powe rline network, measures data rate performance and ensures privacy by setting user defined secure powerline networks. double click on the icon ? ? from your windows desktop, the fo llowing screen will display. this management utility consists of three property tabs, ?status? , ?network? , and ?system? . 4.1 status the status tab shows information of the powerline adapter connected to the current computer where the management utility is running. on this page, you c an also set its network name.
TL-PA2030 av200 3-port mini powerline adapter 13 ? mac address: displays the mac address of the pow erline adapter connected to the current computer where this m anagement utility is running. ? network name: displays the network name of the current network or you can give a name for the network in which the powerline adapter is. by default, the network name is homeplugav. ? use default (homeplugav): check the box before this item to use the default network name. ? apply: click the apply button to make the setting effective. ? password: displays the password of the current pow erline adapter. every powerline adapter has its own password by default, which can be also found on the back of the adapter. ? firmware: displays the current firmware version used by the adapter. ? refresh: click the refresh button to update the information. 4.1.1 set local device?s network name to set the lo cal device?s network nam e, please take the following steps: (1) click status tab to display the status tab window. (2) enter a name for the current network us ing 4?23 characters. or you can check the use default (homeplugav) to use the default name as the network name. by default, the network name is homeplugav. (3) click the apply button to make the settings take effect.
TL-PA2030 av200 3-port mini powerline adapter 14 4.2 network the network tab window shows information of all the powerline adapters found on the current logical network. furthermore, here you can change the name of the listed powerline adapters as well as add another device to the current network. ? type: displays the type of the remote device found in the network. ? name: displays the name of the remote device found in the network. you can change its name following two steps: select the desired adapter and click the modify button. ? mac address: displays the mac address of the remote device found in the network. ? password: displays the supplied powerline adapter?s password (initially left blank). to set the powerline adapter password (which is required when creating a private network or managing all the devices), select the device shown in the figure and click the modify button. follow the pop-up dialog box to complete your password setting. ? rate: shows the current transmission rate of the powerline adapter. ? rescan: click the ?rescan? button to perform an immediate s earch of the remote powerline adapter. the management utility w ill automatically perform t he scanning process and update the display every few seconds by default. ? option: select the device and click the modify button to display a configuration dialog. there you can change the correspondi ng adapter?s name and enter its passwor d for future configuration.
TL-PA2030 av200 3-port mini powerline adapter 15 4.2.1 rename the remote device/enter password you can change the name of the remote adapter to an easy-to-re member one. additionally, you can select the desired adapter and enter its password (tak e note of the password format) so as to set the network name of this device on system configuration homepage. to change the name of the remote adapter or enter its password, please follow the steps below: (1) select the desir ed device and click the modify button to display the following dialog. (2) enter a new name for the selected adapter and enter its password (take note of the password format). the password can be found on the back of adapter. (3) click the save button to make the settings effective. ) note: password is unnecessary to enter for renaming. 4.2.2 add device you can ad d a remote powerline adapter to your net work that is not in t he displayed list. you are suggested to locate the passwords for all powerlin e adapters you wish to manage and add them to the local logical network by clicking the add button. click the add button to display the following dialog box. this dialog box allows you to enter both the selected device?s name and password. note that t he powerline adapter must be present on the power grid in order to activate the set passw ord and be added to the local network. enter your device name and password (take note of the password format) and click the save button after setup.
TL-PA2030 av200 3-port mini powerline adapter 16 4.3 system the system tab window is for some basic settings of the adapter. on this tab window, you can upgrade the firmware to the latest versi on, reset the adapter?s settings to t he factory defaults and configure all adapters? network names. 4.3.1 upgrade firmware c lick the upgrade firmware button to upgrade the version of t he firmware for the adapter and the following dialog will pop up.
TL-PA2030 av200 3-port mini powerline adapter 17 z nvm : none-volatile memory. it is us ed for upgrading the firmware. z pib : parameter information block. it contains configuration values that establish device network identity, general capab ilities and operational modes. if you want to upgrade the version of firmware fo r the device, please select appropriate firmware and pib files together. new firmware ve rsions and pib files are posted at www.tp-link.com and can be downloaded for free. ) note: the parameter information of pib will restore to the factory defaults af ter resetting the plc. to upgrade the device's firmware, follow these instructions: 1. download pib file and firmware upgr ade file from the tp-link website ( www.tp-link.com ). 2. enter the path name or click to select the downloaded files on the computer into the corresponding blanks. 3. click the ok button. ) note: do not turn off the device while the firmware is being upgraded. the devic e will reboot after the upgrading has been finished. 4.3.2 reset device this management utility a llows you to reset t he powerline adapter to its default settings. z reset local device: click this button to reset the settings of the local powerline adapter device only. z reset all devices: click this button to reset the settings of all devices that appear on the network configuration homepage whose device password had been entered for the same logical network.
TL-PA2030 av200 3-port mini powerline adapter 18 4.3.3 set all devices? network name the set all devices? network name function allows you to change the logical network of all devices that appear on the network configuration homepage whose device password had been entered for the same logical network. a dialog window will appear to report the success of this operation. all powerline devices are shipped using a default l ogical network (network name), which is normally ?homeplugav? . to set all devices? network name, please type the name in the field and click the set network name button to apply the setting. ) note: every powerline adapter on your home network must have the same network password for connectivity to be established throughout your home.
TL-PA2030 av200 3-port mini powerline adapter 19 chapter 5 advanced feature: how to use the pair button 5.1 pair (secure with 128 bits-aes) the homeplug av standard uses 128-bit aes (advanc ed encryption standard) to safely transmit data between powerline adapters. for the powerline adapter s to communicate with each other they all need to use the same network membership key (nmk). otherwise, they cannot unscramble the encrypted data sent in the powerline network. the pair button allows you to set up a secure powerline connection with other homeplug av compliant powerline devices which also support the pair feature. 5.2 set up a powerline av network with the pair button you can connect a number of devices on a powerline network, but you can use the pair button on only two devices at a time. create a powerline network using the pair button step 1 . press and hold the pair button of powerline a dapter a for 1 second, the power led will start flashing. step 2 . press and hold the pair button of powerline adapter b for 1 second, the power led will start flashing. (this must be done within 120 seconds after pressi ng the pair button of powerline adapter a.) step 3 . wait for about 60 seconds while your power line adapter a and b are connecting. the power led on both adapters will stop flashing and become solid light when the connection is made.
TL-PA2030 av200 3-port mini powerline adapter 20 join an existing powerline av network: powerline adapter a and powerline adapter b form a homeplugav network, powerline adapter c wants to join this network. step 1 . press and hold the pair button on powerline adapter c for 1 second. step 2 . within 2 minutes, press and hold the pair button on powerline adapter a/b for 1 second. step 3 . wait for about 60 seconds while your powerli ne adapters are connecting. the power leds on powerline adapter a/b and c will stop flashi ng and become solid light when the connection is made. ) note: the sequence of step 1 and step 2 can be exchanged. leave an existing powerline av network: as the figure above shown, powerline adapter a, b and c have formed a homeplugav network. the user wants to remove one device (powerline adapter a) from this network. step 1 . press and hold the pair button on powerline adapter a for at least 10 seconds. powerline adapter a will reset and restart. (the power le d of powerline adapter a will momentarily extinguish during resetting, flash during restarting, and then illuminate steadily.) step 2 . wait for the reset to complete.
TL-PA2030 av200 3-port mini powerline adapter 21 appendix a: troubleshooting the troubleshooting provides answers to comm on problems regarding the powerline adapter. 1. the power led does not light up. ans. check the following: 1. make sure that the powerline adapter is properly plugged into a power outlet. 2. make sure the power outlet is active (working) by plugging another electric device into it. 3. re-plug the powerline adapter to the power outlet. if the power led is still failed to light up, contact your local dealer for technical support. 2. the ethernet led does not light up. ans. check the following: 1. make sure that the ethernet c able (rj45) is properly connected to an ethernet port of the powerline adapter. 2. make sure that the other end of the ethernet cable (rj45) is pr operly connected to the computer lan card or to you cable/xdsl ethernet port. 3. make sure your computer lan card is properly installed and configured. 4. make sure your cable/xdsl broadband access is working and configured correctly. 5. contact your local dealer for technical support if the ethernet led is still failed to light up after the above procedures. 3. the powerline led does not light up. ans. check the following: 1. double click to enable the m anagement utility and click the ?rescan? button under the network configuration homepage. the management utility will automatica lly detect all other powerline adapters on your powerline network. 2. try to plug a second powerline adapter into a nearby power outlet and check whether the powerline led lights up or not. 3. contact your local dealer for technical support if the powerline led is still failed to light up after the above procedures.

▲Up To Search▲

Price & Availability of TL-PA2030

	To Download TL-PA2030 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .